
◇ Introduction ◇ Function◇ Parameter◇ Product order◇ Download◇ Related products
Introduction
DTLH-215BG Smart Temperature and Humidity Calibration Chamber(-15℃~65℃) is a special verification device for detecting hair temperature humidity meters, wet and dry bulb thermometers, digital temperature humidity meters, and other various temperature humidity sensors. The equipment is accurately measured by a temperature humidity sensor and controlled by an industrial programmable controller, which can automatically adjust the humidity in the temperature humidity calibration Chamber. With high control and test accuracy, it can provide continuous and repeatable humidity measurement, suitable for scientific research and product testing.
Execution verification regulation
“JJF1076-2020 digital thermohygrometer calibration specification”
“JJG205-2005 mechanical thermohygrometer verification regulation”
“JJF1564-2016 temperature humidity standard chamber calibration specification”
Product Features
| User-Configurable Ramp Rates | The system features advanced ramp rate control with programmable and adjustable heating and cooling rates. Users can define specific rates to meet diverse testing requirements, making the equipment ideal for complex test conditions such as temperature cycling and alternating damp heat. |
| Multi-Segment Programmable Calibration Profile | The system features advanced multi-segment programming capabilities. It supports storing multiple verification programs with an unlimited number of steps. For each segment, users can independently configure the target temperature, humidity, and dwell time. The system automatically executes the multi-point calibration process in a step-wise manner. With one-click startup, the entire workflow runs fully unattended. |
| Automated Data Management | The system features automated data management. It continuously records temperature and humidity data and directly generates standard XLS spreadsheets. Users can capture chart snapshots with a single click and rapidly export data via USB drive without the need for third-party software conversion. This process aligns with ISO/IEC 17025 laboratory raw data archiving standards, ensuring absolute data integrity and full traceability. |
| High-Performance Temperature & Humidity Control for Uniform Stable Calibration Environment | Adopting proprietary humidity generation technology, it shortens temperature/humidity stabilization time vs. traditional dual-temperature method and reduces test waiting cost. Bath constant-temperature control creates a uniform temperature field via liquid medium balanced thermal radiation, ensuring accurate and reliable calibration data. |
| Multi-Zone Independent PID Configuration and Switching | The chamber’s dead-corner-free air circulation and variable-frequency fan maintains uniform T&H even at low temperatures and eliminates local parameter deviation. The system features multi-zone PID parameter control. Users can independently create, save, and recall multiple sets of PID parameters for different temperature and humidity ranges, eliminating the limitations of factory-fixed parameters. The optimal PID parameters for each condition are independently stored and can be switched as required during operation, achieving precise adaptation across the entire temperature and humidity range. PID intelligent control delivers fast response and high stability; humidity rises from 40%RH to 60%RH within 15 minutes. |
| Freely Configurable Correction Points | Features freely configurable correction points. Users can add, edit, or delete temperature and humidity points without fixed preset constraints. To offset temperature field and sensor installation deviations, independent compensation values can be configured for each specific operating condition. |
| Safety Protection & Quality Assurance | Full safety system: over-temperature protection, low liquid/water shortage alarm, compressor overheat alarm and start-stop protection to lower failure risks and ensure long-term stable operation. |
| Integrated Smart Communication & Remote Management | It supports remote operation via phone/tablet for parameter setup, start/stop and real-time T&H monitoring. Connects to a host PC for automated data acquisition, seamlessly integrating into automated calibration platforms.Ethernet, WiFi, USB and RS-232 interfaces are available for PC data reading and system configuration with good expandability. |
| Smart, Effortless Control Empowering High-Efficiency Calibration | Features a built-in scheduled start function. By presetting the startup time, the device automatically powers on and stabilizes before the shift begins, allowing operators to start calibration immediately upon arrival and saving valuable operational time. |
| Robust Anti-Corrosion Design for Precise Environmental Control | Anodized spray-coated housing offers anti-corrosion, anti-rust and salt-spray resistance. SUS304 stainless steel chamber is clean, corrosion-resistant and easy to maintain. Imported high-precision platinum resistance thermometers and sensors are equipped for high accuracy and stability of control and measurement. |
| Upgradeable to Fully Automated Calibration System | Modular upgrade supported. It can be equipped with image acquisition system, dew point meter, industrial cameras, photo robot and database software to build a fully automatic T&H calibration system. It realizes automatic positioning, photographing, data acquisition, identification, calculation and judgment. Full-process unmanned operation, ideal for large-scale, standardized metrological calibration. |
| Customizable Dual-Port Transparent Inner Door | Features a customizable transparent inner door design. An optional high-transmittance vacuum glass inner door is available, equipped with dual glove ports. This facilitates clear observation, on-the-spot parameter adjustment, and data reading, significantly enhancing operational convenience. |
Technical Parameters
Model | DTLH-15BG | DTLH-18BG | DTLH-25BG | DTLH-28BG | DTLH-215BG | |
Temperature range (°C) | -5 to 65 | -8 to 65 | -5 to 65 | -8 to 65 | -15 to 65 | |
Temperature resolution (°C) | 0.01 | |||||
Humidity range at 20 °C (% RH) | 10 to 95 (5 to 95 is available) | |||||
Humidity resolution (% RH) | 0.01 | |||||
Temperature stability (°C/30 min) | ≤ ± 0.05 (at -8°C to 10°C); | ≤ ± 0.05 (at -15°C to 10°C); | ||||
Temperature uniformity (°C) | ≤ 0.2 (at 15°C to 30°C), | ≤ 0.2 (at 15°C to 30°C), | ||||
Humidity stability (% RH/30 min) | ≤ ± 0.3 (5% RH to 80% RH), | ≤ ± 0.3 (5% RH to 80% RH), | ||||
Humidity uniformity (% RH) | ≤ 0.8 (5% RH to 80% RH), | ≤ 0.8 (5% RH to 80% RH), | ||||
Temperature change rate (°C/min) | ≤ 0.02 | ≤ 0.02 | ||||
Humidity change rate (% RH/min) | ≤ 0.3 | ≤ 0.3 | ||||
Heating rate | 15°C to 20°C in 20 min, | 15°C to 20°C in 30 min, | ||||
Cooling rate | 20°C to 15°C in 30 min, | 20°C to 15°C in 35 min, | ||||
Humidity ramp rates at 20 °C | Increase | 20% RH to 80% RH in 9 min, | 20% RH to 80% RH in 9 min, | |||
Decrease | 80% RH to 20% RH in 15 min, | 80% RH to 20% RH in 20 min, | ||||
Internal chamber dimensions (mm) | 520 × 510 × 500 | 820 × 800 × 510 | ||||
External dimensions (mm) | 1780 × 820 × 965 | 1730 × 1045 × 1300 | ||||
Weight (kg) | 350 | 450 | ||||
Power | AC 220 V ± 5% 50Hz, peak power 5 kW, typical power 3 kW | |||||




Tel
Product
Contact
Home